Sprint 3.1.0
If you have been provided a complimentary 3D Sprint license, please download 3D Sprint v3.1 from the relevant section below. Your license will not work with our latest 3D Sprint v4. ProJet MJP 2500W Plus are the only exceptions, as they are supplied with and require a 3D Sprint v4 license.
Printer Model
Latest Firmware Version
Minimum Firmware Version for Sprint 3.1
FabPro 1000
V128
V128
Projet MJP 2500W
V3.1.13
V3.1.13
Projet MJP 2500IC
V1.6.13
V1.6.13
Projet MJP 2500 Plus (polymer)
V5.1.24
V5.1.24
Figure 4 Standalone
V1.1.2
V1.1.1-3
Figure 4 Modular
GA SW V1.0.3-8 + CM SW image V1.0.3-8
V1.0.3-8
The latest firmware needed to use Sprint directly with the printer. You can use 'Virtual Printer' mode with an earlier firmware to create a build file and transfer it to the printer manually.
System Requirements
-
For Windows 10 / 11, ensure that you have applied the most recent Windows updates for the software to run correctly.
-
Windows 7 and 8.0 are not compatible with Sprint 4.0. If you are using Windows 7 do not upgrade to Sprint 4.0 or newer. If you are using Windows 8.0, please update to 8.1 in order to run Sprint 4.0 or newer.
-
Make sure your graphic card driver is up to date.
-
With 8GB of RAM, a print build can contain approximately 80 million triangles before requiring the use of virtual memory. The more physical RAM available, the greater the number of triangles that can be processed in a build with better performance.
-
It is not recommended to use integrated graphics.
-
The Logitech MX Master wireless mouse is currently not supported due to a software / driver incompatibility.
OS
CPU
RAM
Hard Disk
Display / GPU
Other
Windows 8.1 ~ Windows 11 (64-bit)
Inter or AMD processor with minimum 2.0GHz
4GB
10GB available hard-dis space.
Additional space may be required for cache.
Temporary file cache required - about 3GB free disk space for
every 100 million points.
OpenGL 2.1 and GLSL 1.20 enabled graphics card with minimum screen resolution of 1280 X 960.
Graphics card:
-
Intel HD or Iris (HD 4000 or newer)
-
Nvidia GeForce GTX 285, Quadro 1000 or newer
-
AMD Radeon HD 6450 or newer
3 button mouse with scroll function
Keyboard
Internet Explorer 9 or newer
Microsoft .NET Framework 4.8 (Installed with the software )
Windows 8.1 ~ Windows 11 (64-bit)
Multiple core processor. Hyper-threading and clock speed above 3GH. Should be paired with a good balance of cores.
8GB or more.
SSD
OpenGL 3.2 and GLSL 1.50 enabled graphics card.
Nvidia or AMD GPU with 1GB of RAM or more.
Minimum screen resolution of 1280 X 1024 or higher.
Google Chrome
Internet Explorer 11
Microsoft Edge 41
Recommended
Minimum
Sprint 4.3.0
If you have been provided a complimentary 3D Sprint license, please download 3D Sprint v3.1 from the relevant section below. Your license will not work with our latest 3D Sprint v4. ProJet MJP 2500W Plus are the only exceptions, as they are supplied with and require a 3D Sprint v4 license.
Printer Model
Latest Firmware Version
Minimum Firmware Version for Sprint 4.3
Projet MJP 2500W
V3.1.24
V3.1.15
Projet MJP 2500W Plus
V4.1.13
V4.1.13
Projet MJP 2500IC
V1.6.13
V1.6.13
Projet MJP 2500 Plus (polymer)
V5.1.33
V5.1.24
Figure 4 Standalone
V2.0.0.18
V1.1.1-3
Figure 4 Modular
2.1.0-34
V1.0.4-1
The latest firmware needed to use Sprint directly with the printer. You can use 'Virtual Printer' mode with an earlier firmware to create a build file and transfer it to the printer manually.
Sprint 5.1.0
If you have been provided a complimentary 3D Sprint license, please download 3D Sprint v3.1 from the relevant section below. Your license will not work with our latest 3D Sprint v4. ProJet MJP 2500W Plus are the only exceptions, as they are supplied with and require a 3D Sprint v4 license.
Printer Model
Latest Firmware Version
Minimum Firmware Version for Sprint 5.1
Projet MJP 2500W
V3.1.24
V3.1.15
Projet MJP 2500W Plus
V4.1.13
V4.1.13
Projet MJP 2500IC
V1.6.13
V1.6.13
Projet MJP 2500 Plus (polymer)
V5.1.33
V5.1.24
Figure 4 Standalone
V2.0.0.18
V1.1.1-3
Figure 4 Modular
2.1.0-34
V1.0.4-1
The latest firmware needed to use Sprint directly with the printer. You can use 'Virtual Printer' mode with an earlier firmware to create a build file and transfer it to the printer manually.
V5 is not available yet
Launch License Utility: If for any reason the License Manager does not pop up automatically, click on the gear icon at the top right corner of the software window to open the Preference window. Choose the About tab and click on Launch License Utility button.
Deactivate License: The License manager will also allow you to deactivate your license by clicking the No Entry sign in the Manage License window
Installation & License Management
Check Systems Requirements: Check if the system meets the requirements in the Systems Requirements tab, If your system does not meet these requirements, 3D Sprint may not run on your PC. Don't hesitate to contact us for an advice.
- For Windows 8 - Open the control panel from the start menu, click Systems and Security and click System.
- For Windows 10 / 11 - Open the Settings from the Start menu, click System and then click About.
This guide will help you install and run 3D Sprint. It will also help you to ensure that your systems meets the requirements to run 3D Sprint and that your graphic card is up to date. Please don't hesitate to contact us for any questions concerning your PC and the installation of the 3D Sprint software. For information how to use 3D Spring press F1 once the software has been installed.
Hard Drive: Open the File Explorer. In the left panel click Computer. Check that the hard drive has at least 30GB of free space. During installation 3D Spring will require additional space for caching temporary 3D data. If your hard drive does not have enough available space, 3D Sprint may not run properly.
Check and Update Graphics: To check which graphics card is installed, search for Device Manager in the start menu or search box. Double click on Display adapters. Check that the computer has either INTEL, AMD or NVIDIA graphics card. Update that the graphics card drivers are up to date and update them is needed.
Software Installation: Download 3D Sprint from the relevant tabs above. Please make sure that you are downloading the correct version for your license. Please ask us if you are not sure.
Choose your installation language and click OK.
When the installer opens, If some of the prerequisites that are needed to run 3D Sprint are missing, the installer will help you install them. Click Next to install the missing prerequisites.
The missing prerequisites should be selected on the prerequisite list. The ones than are no selected are already installed on your system. The selected ones have to be installed to continue the installation. Click Next to install the prerequisites.
After all the prerequisites are installed. Click Next to continue.
Choose the destination folder and click Next.
There is no need to tick the 'Install Projet 1200 USD Driver' box unless you have one.
This is an old printer that connect via USB cable.
Note that previously installed versions of 3D Sprint will be overwritten
Select 'I Accept the license agreement' (If you accept...) and click Next
Ticking the 'Install as Free Client' box will not active a trail license on install.
If there is already an active license, this option will has no affect.
Click Next to start the installation.
Click Install to start the installation.
Click Finish to close the installer. If the 'Launch 3D Sprint' option is checked, the software will launched upon exit.
Software Uninstallation: Open the Control Panel and click on Uninstall a program. In Windows 10 / 11 you can type "apps & features" in the search bar. Double click on 3D Sprint from the list of programs or just select it and click Uninstall at the top.
You can also uninstall the software running the installation file again and choose remove.
1.
2.
3.
4.
5.
6.
7.
8.
10.
11.
12.
13.
14.
Activate License: 3D Sprint requires license activation to run the software on your PC. You should activate a permeant license by using your personal / company activation code. After you start 3D Sprint, the License Manager window should open. The license manager allows you to enter your activation code and use the 3D Sprint software.
-
If you do not have your activation code, please refer to the 'Get Your Activation Code' tab and request your code.
-
If you are an existing user and have already activated the license on your PC with a previous version, the existing code your retained in the new license system. You can run the newer version without re-activating the license.
15.
16.
9.
17.
Software Update & Printer Visibility Patches: Enable / Disable the 'Check For Updates On Launch' & 'Check For Printer And Material Updates' on the 3D Sprint tab in the Preference Window. We recommend to enable both.
17.
Get Your Activation Code
As a new / existing 3D Systems 3D Printer customer, you are entitled to use the powerful complimentary 3D Sprint software.
Please fill out the form below to request your license and allow 24-48 hours to process your request.